The Drillcon 100 Resources Page
This page contains various bits and pieces that might be useful.
X axis stepper motor: 440-442 size 23 500 mNm torque from RS Components. ~£47.00.
DryLin slide rail 17 x 300 mm: 448-5433 from RS Components. ~£10.80 each.
DryLin slide carriage 17 mm: 448-5405 from RS Components. ~£4.00 each.
Stainless steel studding (threaded rod) M8 x 1 m: 517422 from Farnell.
~£2.80 each. (I used two rods).
1.2 mm tungsten router bit: 4755303 from Farnell.
~£4.00.
Eagle from Cadsoft.
QCad from Ribbonsoft.
Damn Small Linux.
RTAI-Linux.
The original schematic in Eagle
format.
The PCB schematic in Eagle format.
The PCB board design in Eagle
format.
Y axis initial concept drawing in
QCad/Autocad format (DXF).
Y axis endplate drawing in
QCad/Autocad format (DXF).
Y axis steel plate drawing in
QCad/Autocad format (DXF).
Y axis wood plate drawing in
QCad/Autocad format (DXF).
Z axis plate drawings in
QCad/Autocad format (DXF).
Z axis drill mount plate drawing
in QCad/Autocad format (DXF).
X axis carriage plate drawing in
QCad/Autocad format (DXF).
X axis endplate drawing in
QCad/Autocad format (DXF).
The Drillcon source code Version 1.0.
The Drillcon source code Version 1.1.
The Drillcon 100 in action movie (MPEG1).
<Back>